Information about GPR scanning

There are certain ways in which it is possible for us to locate what is inside concrete without having to demolish it. The techniques that are most commonly being used for this particular purpose are known as Ground Penetrating Radar or GPR and concrete scanning x-rays. If truth be told, both of these techniques tend to have their own sets of advantages and disadvantages.

 

The fact of the matter is that the utilization of X-rays for this purpose isn’t really recommended. You need to bear in mind the fact that X-rays have been categorized by the World Health Organization as carcinogens, thereby deeming it necessary for the entire area to be evacuated in case you wish to have post-tension cables traced during renovations or repairs. On the other hand, the technique known as coring comes with its own set of setbacks as it tends to focus on cutting through walls and concrete floors. The best way to handle all of this is to have ground penetrating radar implemented. This can help out a great deal in terms of detecting pipelines and post-tension cables along with a number of other items that are usually placed within floors or concrete walls.

 

With the help of a GPR image, it will be extremely easy for structured inspections to be performed over towers, bridges, tunnels and a number of other surfaces as long as the concrete thickness is measured to be below 18 inches. GPR scanning concrete equipment can be used for the purpose of locating and mapping out items found within concrete. These can further be used as a means of creating detailed reports through which any and all anomalies and depths can easily be identified. However, if you are interested in acquiring higher resolution images for the identification of smaller wall structures, then it is best for you to stick to the utilization of x-rays. X-rays basically offer computed tomography, radiotherapy and even fluoroscopy. This makes it the better choice for those who wish to work with higher quality images with the best resolution possible.

 

On the whole, in case there is a project at hand that deems it necessary for you to cut, drill or core, then it is highly recommended for you to opt for GPR inspecting or have an x-ray scan run through. If anything, this will go a long way in helping you acquire clearance for the project at hand. Click here for further information.